Mega-Temp™ Available on a Variety of Materials

Purchase Mega-Temp™ Insulation pre-installed on your choice of materials to realize immediate benefits

Fabrics and/or Panels:
Canvas, Cordura Nylon, Cotton, Fiberglass, Kevlar 29 [Ballistic] or Kevlar 49 [Structural], Lycra, Nylon, Polyethylene, Silk, Spectra

Metal Rolls and/or Sheet and/or Panels:
Aluminum, Brass, Copper, Lead, Galvanized Steel, Stainless Steel, Titanium

Piping:
Copper, Lead, Steel
PVC, Synthetics

Available in BULK quantities only.

Purchase Inquiries:
Jim C. Mu
Executive Vice President
jmu@mega-temp.com

*Please submit all RFQs in writing and on company letterhead.

Tel no: (702) 685-9326
Fax no: (775) 201-1823

Delivery Schedule:
3 months after payment confirmation
[updated: July 2010]

Mega-Temp™ Insulation Technical Data

 

Density Dried Less than 10 grams per square foot (60 kilograms per cubic meter)
Average Thickness Less than 1 millimeter
Incombustible Per FAR 23.853(a); FAR 25.853(b) Appendix F
Service Temperature Steady State Temperature: 260 C (500 F)
Transient Temperature: 1093 C (2000 F)
Heat Release Passed SINTEF NBL Nordtest method NT Fire 004 NS-INSTA 412 for In 1 classification
Smoke Development Does not exceed 10% density per Nordtest method NT Fire 004 NS-INSTA 412 for In 1 classification
Melting Point Exceeds 1093 C (2000 F)
Moisture Absorption Less than 1%
Permeability Per ASTM-96 at 0.05 perms
Cryogenic Exposure Experiences no deteriorating effects at -195.58 C (-320 F) (liquid nitrogen)
Acoustic Transmission Loss Up to 6 decibels
Acoustic Absorption Up to 9 decibels
Corrosion None: No corrosive influence as applied to various metallic alloys, woods, or glass Vapor barrier properties actually help inhibit corrosion.
Acid Exposure Sulfuric, nitric, hydrochloric acid inert
Ozone Exposure Inert
Ultra Violet Exposure Inert
Impact Resistance Drop Ball Test: Experiences no delamination or cracking.
  Does not promote bacteria, fungi, insects, or vermin.

 
Thermal Conductivity Btu·1mm/(hr·ft2·°F)
23.89 C (75 F) mean 0.26
93.33 C (200 F) mean 0.28
148.89 C (300 F) mean 0.31
204.44 C (400 F) mean 0.35
260 C (500 F) mean 0.40

 
Application  
Application Low pressure air system
Cure Cycle Dry to the touch in 15 to 40 minutes. Cured 100% in 48 hrs. Contact us for special application.